Region Selection; Voice Command - HJC Smart 20B User Manual

SMART HJC 20B

12.6 Region Selection

You can select the proper FM frequency region from the SMART HJC
Device Manager. With the region setting, you may optimize the seek
function to avoid unnecessary frequency ranges.
Region Frequency range
Worldwide 76.0 ~ 108.0 MHz
Americas 87.5 ~ 107.9 MHz
Asia 87.5 ~ 108.0 MHz
Australia 87.5 ~ 107.9 MHz
Europe 87.5 ~ 108.0 MHz
Japan 76.0 ~ 95.0 MHz
30

13 VOICE COMMAND

The voice command of the headset allows you to operate certain
operations by simply using your voice. You can control the headset
Step
completely handsfree using the voice recognition. The voice command
± 100 kHz
function works only with English commands.
± 200 kHz
Voice Command Procedure:
± 100 kHz
1. There are two ways to enter the voice command mode. The
± 200 kHz
simplest way is to tap the Center Button and the (-) Button
simultaneously. Another way is to say, "Hello Sena" during stand-
± 100 kHz
by mode.
± 100 kHz
2. Speak a voice command from the table below: