Advertisement
3. Installation
A cleaning cloth and a piece of double-adhesive tape are supplied with the
antenna.
To avoid mechanical stress, the antenna should not be
Caution
installed at doors or similar.
Before the antenna is installed, check that the surface is clean and smooth.
Install the antenna using the double-adhesive tape supplied.
Install the antenna as follows:
1. Clean the surface on the back of the antenna with the cleaning cloth
supplied.
2. Remove the protective foil from one side of the double-adhesive tape,
and attach the tape to the back of the antenna.
3. Remove the protective foil from the other side of the tape.
4. Place the antenna on the surface, and press it against the surface to
ensure correct adhesion.
Caution
For vertical installation, the cable must point downwards.
Do not install the antenna if the surface temperature is lower
Note
than -10 °C.
Install the antenna so that the signal is not disturbed by the surroundings.
GSM antenna (back side)
Fig. 1
5
Advertisement
