Advertisement
3.
Attach tilt bracket assembly to back of antenna using screws provided (as shown)
Built in Amplifier (Amplified version only)
Disregard this step if you have the non amplified version. On the Lacrosse A, There
is a built-in low noise pre amplifier. You do not need to run electricity to the
antenna. Power comes from an external power inserter (supplied). The power
inserter supplies 18volts to the antenna via regular coax cable
Connect the power inserter to the antenna where it says "To booster" then connect
the power inserter to your digital tuner via "to TV" output.
Warning to reduce the risk of fire or electrical shock, do not
expose power inserter to rain or moisture.
Advertisement
