Advertisement
4. Frameset assembly
4.4 Installing headset and ICS Stem
• Install the fork and headset,
using grease on all contact surfaces
• Arrange and align cable routing
- brake lines can be positioned
in the opposite position
(Left – Rear, Right – Front)
• Install headset top cone (high or low stack)
and spacers
• Install stem cable guide and gently position
cables downward
• Install ICS Stem and steerer tube inserts
• Install top cap and compression bolt
r
3Nm max torque
• Install stem steerer clamp bolt - grease required
7Nm max torque
r
• Install stem cable clamp
• Install stem cable cover
• Install optional Junction A mounting unit
4.5 Finishing Assembly
• Assemble and adjust brake and drivetrain
equipment per manufacturer's instructions
ROADMACHINE - Integrated Cockpit System (ICS) Instruction Manual
Route the front brake
Install bearings and compression ring – cables will
housing to the non-drive
sit securely on flat sides of steerer tube
side
Install stem and
Install top cap
steerer inserts
Install faceplate and faceplate cover – make sure the
top faceplate 'puzzle' clamp is securely engaged
7Nm max
3Nm max
torque!
torque!
(grease
required)
Install stem steerer
clamp bolt - grease
required!
Install Di2
junction box (optional)
Install top cone, spacers
and cable guide – gently
fold cable downward
Install cable clamp
and cable cover & Di2
junction box mount
(optional)
Hide quick links:
Advertisement
