General Notes About Assembly; Repair Stand - BMC Roadmachine Owner's Manual

Generalities

General notes about assembly

Tools
Bike specific tools are required to perform the assembly of your Roadmachine and its components.
We recommend that you have a qualified bicycle mechanic correctly install these components.
Before you start assembling, make sure you are equipped with the following tools:
Hex keys:
• 2.5, 3, 4, 5, 6 mm
Torque wrench and bits
• Hex 2.5, 3, 4, 5, 6 mm
• Torx T25
Special tools
• Carbon saw blade Park Tool CSB-1.
• Park Tool IR-1.2 Internal Cable Routing Kit
Grease compounds:
• Grease gun or grease brush
• Fine assembly grease
• Friction paste
• LOCTITE® 243 Blue threadlocker
Operator protection:
• Eye protection
• Hands protection

Repair stand

!
WARNING: Clamping the frame or its components into a bike repair stand could damage its
structure or finish.
! WARNING: Never clamp the frame by the top tube, downtube or seat tube.
Please use a traditional fork mount stand like the Park Tool PRS-22.2 Team Issue Repair Stand.
Roadmachine Owners Manual
19