Gemview 10 Touch Tablet Display Set-Up - Topaz Systems GemView 10 User Manual & Software Set-Up

GemView 10 Touch Tablet Display Set-Up

For users with the GemView 10 Touch Tablet Display (model TD-LBK101VT-USB-R), follow
these steps for set-up:
1. The GemView 10 Touch Tablet Display (GemView 10T) looks and performs like the
standard GemView 10 Tablet Display, but it responds to finger touch input in addition to
pen input. Follow the installation instructions provided earlier in this manual, then
continue below.
2. With the GemView 10T connected to your PC, go to Control Panel → Tablet PC
Settings. In the Display tab, click the "Setup..." button.
16
GemView 10 & 10 Touch Tablet Display User Manual
www.topazsystems.com
Back to Top