Acura 2011 TL Owner's Manual page 527

Lights
BULB
Remove the socket from the
4.
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Remove the bulb by pulling it
straight out of its socket.
524
Install the new bulb in the socket
6.
SOCKET
by pushing it straight in the socket
until it bottoms.
7. Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Turn on the lights to make sure
the new bulb is working.
9. Push the under cover in place and
set the spoiler and inner fender
cover in the original position.
Install the bolts and tighten them
securely. Put the holding clip, and
lock it by pushing on its center.
2011 TL
Replacing a Front Turn Signal/
Parking Light Bulb
1. Start the engine. If you are
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.