Table of Contents
Advertisement
Quick Links
Rocking Piston Compressors
Installation and Service Manual
for ERP25, ERP252, ERP50, ERP502, ERP75, ERP752
Thank you for purchasing the ERP series
rocking piston compressor. This instruction
manual explains the product operations
and gives important precautions regarding
its safe use. Please read and follow these
instructions to experience years of trouble
free service on these top of the line units.
To avoid accident, do not use the
compressor in any way other than as
described in this instruction manual
especially when you see "WARNING".
After reading this instruction manual, keep it
nearby as a reference in case questions arise
during use. If this instruction manual should
become lost or damaged, ask your nearest
dealer or representative for another copy.
Installation
WARNING! Electrical Shock Hazard. Disconnect electrical power at the circuit
breaker or fuse box before installing this product. Install this product where it will
not come into contact with water or other liquids. Install this product where it will
be weather protected. Electrically ground this product. Failure to follow these instructions
can result in death, fire or electrical shock.
Correct installation is responsibility of installer. Make sure of proper installation conditions
and that clearances do not block air flow.
Blocking air flow over the product in any way can cause product to overheat.
Mounting:
Mounting the product to a stable, rigid operating surface and using shock mounts will
reduce noise and vibration.
ERP Series
ERP Series
Advertisement
Table of Contents
Related Manuals for EasyPro Stratus ERP Series
Summary of Contents for EasyPro Stratus ERP Series
- Page 1 Rocking Piston Compressors ERP Series Installation and Service Manual for ERP25, ERP252, ERP50, ERP502, ERP75, ERP752 Thank you for purchasing the ERP series rocking piston compressor. This instruction manual explains the product operations and gives important precautions regarding its safe use. Please read and follow these ERP Series instructions to experience years of trouble free service on these top of the line units.
- Page 2 Plumbing: Connect with pipe and fittings that are the same size or larger than threaded ports. Be sure to connect the intake and exhaust plumbing to the correct inlet and outlet ports. Accessories: Check filters periodically and replace when necessary. Install relief and gauges at inlet or outlet or both, to monitor performance.
-
Page 3: Troubleshooting
Maintenance: WARNING! Electrical Shock Hazard. Disconnect electrical power supply before performing maintenance. Failure to follow these instructions can result in death, fire, or electrical shock. WARNING! Injury Hazard. Product surfaces become very hot during operation, allow surfaces to cool before handling. Air stream from product may contain solid or liquid material that can result in eye or skin damage, wear proper eye protection. - Page 4 EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this Product. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State.
Need help?
Do you have a question about the Stratus ERP Series and is the answer not in the manual?
Questions and answers