Summary of Contents for Gared ADJUSTABLE JUNIOR JAMMER
Page 1
ADJUSTABLE JUNIOR JAMMER INSTALLATION INSTRUCTIONS 03/26/19 3/14/2019 DATE Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC. 9200 E. 146th St. Q:\Inventor Files\_xxxx-xx-xx\JJ5 MODEL Noblesville, IN 46060 PERFORMANCE DATE SHT. NO. PART NO. SPORTS SYSTEMS 3/14/2019 JJ5A...
Page 2
GOAL HEIGHT OF 7 FT (LOWEST HEIGHT) THE UPPER ANCHOR POSITION ON THE BACKBOARD FRAME IS USED. USE THE ADJUSTABLE BRACE TO PLUMB THE BACKBOARD AND LEVEL THE GOAL. Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC. 9200 E. 146th St.
Page 3
ITEM (11) M12 JAM NUT M8 FLANGE NUT M8 FLAT WASHER TWO EA. TEN EA. SIX EA. Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC. 9200 E. 146th St. Q:\Inventor Files\_xxxx-xx-xx\JJ5 MODEL Noblesville, IN 46060 PERFORMANCE DATE SHT.
Page 4
Assemble net (3) to goal (2), then assemble goal (2) to backboard (1) using hex head M8x70mm (9) on top two holes and hex head M8x60MM (10) on bottom two holes of goal with M8 flat washers (11) and M8 flange nuts (12) as shown in detail. Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC.
Page 5
M8 flat washer (11) and M8 flange nut (12) as shown above. Install hand knob (7) on upper frame connector (6) and upper frame assembly (4) Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC. 9200 E. 146th St.
Page 6
Secure unit into place as shown in detail “A” and fully tighten hand knob M12x50mm (7) and secure with jam nut M12 (15) on both sides. Installation and Assembly Instructions ADJUSTABLE JUNIOR JAMMER Gared Holdings, LLC FILE LOC. 9200 E. 146th St.