Carlon KPR-15G-BRZ Owner Operating Instructions

(KPR) KITCHEN POWER POP-UP RECEPTACLE
KPR-15G-BRZ (Bronze), KPR-15G-BRS (Brass) and KPR-15G-NKL (Brushed Nickel)
IMPORTANT: Read all instructions before operating KPR Kitchen Power Pop-Up.
• For indoor use only.
• If any malfunction occurs, do not attempt to repair.
• This product has no field serviceable parts.
• Use this product only for its intended uses as described.
• Do not install in line with power converter.
A
To start using the KPR, simply press downwards on
the cover, then release hand pressure and the unit will
rise automatically. The power will not be supplied to
the receptacle until the KPR is locked in place.
PRESS
DOWNWARDS
TO RAISE COVER
Cover
Step 1
B
Insert power cord plug to the GFCI Receptacle.
TA04601 B Page 1 of 2
®
Owner's Operating Instructions
For Catalog Numbers
Voltage: 110-125 VAC – 60hz

WARNING

Step 2
Current: 15 amp max.
• Do not use attachments not recommended by
manufacturer.
• Do not insert foreign objects into power outlet receptacles.
• For counter top mounting only.
C
The KPR unit should
not be retracted
with power cord(s)
still plugged into the
GFCI receptacle.
DO NOT PUSH DOWNWARDS
WITH POWER CORD
PLUGGED IN
IMPORTANT: Press the TEST button
(then RESET Button) every month to assure
proper operation.

TROUBLE SHOOTING

If power is not available at the receptacle with the KPR in its
raised position, the Ground Fault Circuit Protection (GFCI) may
have switched the receptacle off. Remove all power cords
from the KPR and receptacles on the same circuit, then push
the GFCI reset button.
If power does not return to receptacle:
• Be sure the KPR is in fully raised and locked position.
• Check the circuit breaker or fuse at the panel box.
If the GFCI continues to trip, contact a qualified electrician as
this is an indication of an electrical fault in the circuit.
D
After use, remove
any power cord(s)
from the GFCI
receptacle. Push the
unit downwards until
it is flush with the
counter top surface
and it clicks into to
the retracted position.
UNPLUG AND PUSH
DOWNWARDS
RESET
TEST