MOUNTING DIAGRAM
MOUNTING KEY
Part (B1) Bolt
Part
(Mounting Bracket)
Part (W1) Washer
Part (N1) Nut
LIGHT ANGLE ADJUSTMENTS
1. Use a 10mm socket to loosen the 1 Hex head bolts Part (B2)
on the side of the light.
2. Adjust the light to your desired angle and tighten Bolt (B2).
ADJUSTMENT KEY
Part (B2) Bolt
a. 10mm Hex Head Bolt
MAINTENANCE
All Vision X models have been designed for maintenance free use.
In the case that an LED lamp or other part replacement is needed
please contact your authorized service center.
VISIONXLIGHTING.COM
(B1)
(Mounting Bracket)
(W1)
(N1)
(B2)
1.94"/49mm