Table of Contents
Advertisement
4. Insert the battery (model: CR2032) with
positive pole (+) facing upwards into the
battery compartment.
5. Position the back cover over the battery
compartment and press down around the
edges until you hear it click into its place.
6. VerveCam Tag powers on automatically when
the battery is installed correctly.
Pair VerveCam Tag with your Camera
1.
Keep the camera in power down mode.
To power down the camera, hold down the
POWER / MODE button 0 for 3 seconds.
You will hear a voice prompt indicating that
the camera is powering off before the LED
indicator goes off.
2.
Hold down the camera's SHUTTER/
SELECT button
pairing mode.
The LED indicator flashes in RED and BLUE.
3.
Hold down the PAIR/SHUTTER button on
VerveCam Tag for 3 seconds to start pairing.
4.
Once paired, VerveCam Tag will emit 2
beep tones and the LED indicator on the
camera stops flashing.
en
back cover
VerveCam Tag
PAIR/SHUTTER button
for 3 seconds to enter
VerveCam Tag 3
Advertisement
Table of Contents
