VerveCam Tag
VerveCam Tag works as a remote control for your
camera. You can pair VerveCam Tag with
multiple cameras.
Remove Plastic Strip to Power On
The device uses a replaceable battery (CR2032).
The average battery life is up to 6 months. Replace
the battery if VerveCam Tag does not respond
Replace VerveCam Tag Battery
1. Remove the battery cover using the supplied
opener.
2. Slip the opener into the slot on the back of
VerveCam Tag.
3. Gently twist the opener to pop open the
cover. Once the cover starts to open, work
your way carefully around the cover until it
pops off.
2 VerveCam Tag
en