PowerBox Systems PowerBox Cockpit SRS Instruction Manual page 29

- HoTT
Connect the backer's telemetry output to the receiver's Sensor input
using a standard commercial Uni patch-lead. Select the "Electric Air
Module" in your transmitter's telemetry menu. The voltage of both
batteries, and the residual capacity of the weaker battery, can now be
viewed on the transmitter's screen.
10. Reset, Update, Save and Restore
The Cockpit/Competition SRS offers numerous facilities for resetting
individual ranges without affecting other settings. For example, it is
possible to reset Output Mapping without affecting the Servo
Matching settings.
All the Reset options can be found in the RESET/UPDATE menu:
In the interests of safety, the software generates a confirmation query
when you select one of the Reset options; the intention is to avoid
accidental erasure of data. If you confirm this query, the settings are
permanently erased, and cannot be restored.
The lowest line in the menu - PC-CONTROL - has several functions:
selecting this point enables you to update the software in conjunction
with the PowerBox Terminal PC program, save the backer's internal
settings on a PC, or restore saved settings from a PC.
These options require the installation of PowerBox Terminal on your
home computer. The PC program is available as a free download from
our website, together with installation instructions.
Start the PowerBox Terminal program, and look for UPDATE and
SAVE/RESTORE in the top row of tabs. Make your selection, connect
the PowerBox USB Interface to the TELEMETRY socket on the
Cockpit SRS and select the PC-CONTROL point in the menu.
From this point on simply follow the instructions on the screen.
-29-