Making Calls With Memory Dialing - Sylvania ST88245 Owner's Manual

If you make a mistake while entering a name:
Use /TONE/
Press CH/DELETE to erase the wrong character, then enter the correct
character. To delete all characters, press and hold CH/DELETE.
For example, to enter Bobby:
1) Pick up the handset. Press MEM.
2) Enter a number or press
number.
3) Press SELECT twice.
4) Press 2 twice.
5) Press 6 six times.
6) Press 2 five times, then press #/
NOTE: If the next character uses the same number key, you must press
move the cursor over. Otherwise the next time you press the number
key, it changes the character that was previously set.
7) Press 2 five times.
8) Press 9 seven times.
9) When finished, press SELECT.
To continue to store the telephone number, proceed to step 6 on page 15.

MAKING CALLS WITH MEMORY DIALING

MEMORY DIALING FROM STANDBY MODE
1) Press MEM. The handset displays your programmed memory locations.
2) Press /VOL and
number (0 - 9) to select the memory
location you would like to dial.
3) Press TALK/FLASH. "
volume setting appear on the display.
Then the displayed number is dialed.
or #/ to move the cursor to the incorrect character.
/VOL,
/VOL, or enter the
" and the
/VOL to select a memory location
to move the cursor to the right.
#/
to
17