Troubleshooting - Team Kalorik TKG AP 1000 User Manual

Fax +32 2 359 95 50

TROUBLE SHOOTING
If the machine can't work properly, please kindly check as below before you send it out for repair.
Problem
The device does not start /
the buttons do not work
There is always an
unpleasant smell coming
from the device.
The device is very noisy
Temperature and humidity
do not change or very little
If, after checking the above solutions, the problem persists, the appliance must be sent to the
service center for inspection and possible repair.
PERFORMANCE INDICATORS
Product name
Voltage Supply
Air flow volume (m
Noise level
Length of power cord
Product size
Net weight:
Power rating (W))
Application area
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Possible cause
Check whether the power
cable is plugged in
Is there a strong smell in the
room where the appliance is
located? (Notes: the air
needs constant cleaning)
Has the life of the HEPA filter
been exceeded?
Has the filter packaging been
properly removed?
Has the life of the HEPA filter
been exceeded?
The device does not support
a room that is too large
/h)
3
Assembly page 9/59
Possible solution
Connect the cable
properly
First, ventilate the room well
and start the unit.
Replace the HEPA filter with a
new one
Remove the filter and remove
the packaging and put the
filter back in place
Replace the HEPA filter with a
new one
Use the device in a suitable
room
Air purifier Model No: B-D01
DC 5V
≥ 35m /h
3
≤ 35dB (A)
≥ 1,5 m
115 mm x 209 mm
0,7 kg
3,5 W
5-8m
2
9
TKG AP 1000 - 180821