Cleaning And Maintenance - Team Kalorik TKG AP 1000 User Manual

Connect the cable from one side to the power supply socket, on the other to the USB port on
another device (eg Computer, USB socket in the car), or directly to the AC / USB 5V adapter
(adapter is not included).
INSTRUCTIONS
Power setting
Press the "power" button on the device, it will start in the initial operating
mode
Fan speed setting
By pressing the fan speed icon, you can select the fast or slow speed. Hold down the speed
button for 3 seconds to enter the sleep mode and press again to return to normal mode.
Note: Sleep mode = night mode: fan speed and noise are very low, only the "power" icon is
highlighted
Fan speed indicator:
Speed adjustment Sleep mode

CLEANING AND MAINTENANCE

1. Disconnect the item from the power cord before cleaning.
2. Clean the body with a damp cloth and wipe it dry.
3. In case of heavy dirt, you can use a neutral detergent diluted on a cloth.
4. Do not clean the unit with solvents that may deform or discolor the case (as shown in the
figure below).

Back cover page (last page)