Advertisement
Operating Instructions
1. Only the original clamping handle should be used for clamping work pieces in the
vise. Using pipes or cheater bars may damage the vise and render the warranty void.
2. Over time, the machined V-guides may wear. By using a hex key you can tighten the
adjustment nuts to restore smooth parallel operation of the vise jaw movement.
3. Periodically lubricate the V-guides and clamping screw in order to maintain smooth
operation and long life.
Lubricate Clamping Screws
Never Use Cheater Bar in place of the original clamping
handle
Advertisement
