Advertisement
Quick Links
iPad™ IPM-530 Tabletop Stand and Wall Mount Installation Instructions
The IPM-530 tabletop stand and wall mount securely holds the Apple
iPad™ or iPad2™ (not included) in place and gives access to all
iPad™ controls and connections. Attach the removeable back plate to
the base, then rotate the mount for landscape or portrait placement.
The mounting base can be placed freely on a tabletop, or drilled into
it with wood screws. The base can also be mounted to a wood stud or
surface..
Step 1
Remove the back plate from the
iPad™ frame.
Step 2
Are you installing an original
iPad™ or iPad2™ to the
IPM-530?
If an original iPad™, remove
the corner felt pads on the
iPad™ frame. Then continue
to step 3.
If an iPad2™, continue to
step 3.
• All trademarks are the property of the respective trademark owners.
Installation Instructions
9531-056-061-00
Remove if using original iPad™
Remove if using original iPad™
Visit the Premier Mounts website at http://www.mounts.com
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Other Locations – Phone: (001).714.632.7100; Fax: (001).714.632.1044 ©Premier Mounts 2011
Parts List
iPad™ Frame
(Qty 1)
IPM-530 Mounting Base
(Qty 1)
Step 3
➊
Extend the arms of the iPad™
frame.
➋
Insert the iPad™ in the iPad™
frame.
Each arm of the iPad™ frame
should fit over a corner of the
iPad™.
Continue to Step 4 on page 2.
IPM-530
#8 x 1¼" Wood Screw
(Qty 4)
10-32 x ¼"
Flat Phillips Screw
(Qty 2)
Push-In Rivet
(Qty 4)
Advertisement
Related Manuals for Premier Mounts IPM-53
Summary of Contents for Premier Mounts IPM-53
- Page 1 USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations – Phone: (001).714.632.7100; Fax: (001).714.632.1044 ©Premier Mounts 2011 Parts List The IPM-530 tabletop stand and wall mount securely holds the Apple iPad™ or iPad2™ (not included) in place and gives access to all iPad™...
- Page 2 (pointed side down) to the mounting base (Figure 2). 10-32 x ¼” Flat Phillips Screw Figure 1 10-32 x ¼” Flat Phillips Screw Figure 2 Page 2 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
- Page 3 M4 x 16mm pan combo screws on the sides of the back plate. Push-in rivet Figure 1 Wood screw Wood screw Figure 1 Figure 2 Figure 2 Figure 3 Installation Instructions Page 3 Visit the Premier Mounts website at http://www.mounts.com...
- Page 4 (Figure 2). ➎ 5.91 Rotate the mount to the desired 17.12 4.80 landscape or portrait position. 121.92 1.35 5.07 34.29 128.85 2.62 66.55 Wood screw Figure 1 Figure 2 Page 4 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Need help?
Do you have a question about the IPM-53 and is the answer not in the manual?
Questions and answers