Personnel Qualification And Education; Danger That Can Occur If The Security Regulations Aren't Observed; Working Safely; Security Regulations For The User And Technical Service - Rioned MULTI JET User Manual

Always use the break cable during transport.
Never exceed the maximum speed (50 miles/h).

2.5 Personnel qualification and education

Personnel that use, maintain and inspect the machine must have the right qual-
ifications for this job.
Responsibility and authorisation of the personnel and the supervision on the
personnel must be embedded. If the knowledge is not present, the user must
provide for the necessarily education.
Be sure personnel understands the content of this manual.

2.6 Danger that can occur if the security regulations aren't observed

If the security regulations are not observed, danger can occur for personnel
and for the environment.
No amends are given if the regulations are not observed.
If the regulations are not observed, this can results in:
•
•
•

2.7 Working safely

The in this manual named security prescriptions, the national prescriptions to
prevent accidents and the internal labour, company and security prescriptions
must be followed by the user.

2.8 Security regulations for the user and technical service

•
•
•

2.9 Security regulations for maintenance, inspection and mounting activities

•
•
•
•
01/18
Failure of important functions of the machine.
Failure of prescribes methods for maintenance.
Exposure of persons to dangers of electrical or mechanical failures
Protections of moving parts (for example couplings) may not be re-
moved if the machine is working.
Leakage of dangerous mediums must disposed in a manner that there
is no danger for the personnel and environment. Statutory regulations
must be followed.
Danger caused by electricity must be excluded.
The user sees to it that qualified technicians do all maintenance, in-
spection and mounting activities. They must study the manual thor-
oughly.
Maintenance may only be done when the machine is not functioning.
The in the user's manual mentioned handling to stop the machine must
be notified.
Directly after maintenance of the machine, all the security and protec-
tion facilities must be functionally.
10