Advertisement
Available languages
Available languages
Quick Links
PRODUCT DESCRIPTIONS:
These instructions cover the following FloTech products:
FT150S
Replacement SST Thermo-Optic Overfill Probe
FT151S
SST Thermo-Optic Sensor with 3"NPSM Probe Holder
FT155
Electronic 5 Channel Dummy
FloTech Thermo-Optic sensor and Thermistor Dummy are mechanically and functionally
compatible with Scully Thermistor, Thermo-Optic and Thermistor Dummy components.
These "Electronic" Thermistor sensors will provide reliable operation when installed as
replacements to conventional "Green Tipped" Thermistor sensors. FloTech Thermo-Optic
sensors and electronic dummy provide high reliability, long life, and quick start up in cold
weather.
INSTALLATION INSTRUCTIONS:
FloTech model FT151S can be mounted on a 3"NPT male pipe nipple. After the sensor is
mounted remove the lid.
To adjust sensor length, use ¾" NPT pipe nipples cut and threaded to desired length. Use
Teflon pipe dope or pink Teflon tape to seal the threads.
IMPORTANT: The actual sensing point adjustment should be determined by the total
response time required to prevent a tank overfill condition. The FloTech sensor reaction time
is one half second. The loading rack will also have a reaction time.
Rev: Oct 2008
SST Thermo-Optic Sensors and Thermistor Dummy
Dixon Bayco
4740T Interstate Dr. Cincinnati, OH 45246
PH: 513 874 8499 FX: 513 874 8399
Instruction Manual 10564
2 Wire Black & White
Page 1
Advertisement
Related Manuals for FloTech FT150S
Summary of Contents for FloTech FT150S
- Page 1 INSTALLATION INSTRUCTIONS: FloTech model FT151S can be mounted on a 3”NPT male pipe nipple. After the sensor is mounted remove the lid. To adjust sensor length, use ¾” NPT pipe nipples cut and threaded to desired length. Use Teflon pipe dope or pink Teflon tape to seal the threads.
-
Page 2: Wiring Instructions
It is highly recommended to use FloTech FT400 jacketed 5-conductor cable when wiring a new system. FloTech cable is designed to be oil, UV, and abrasion resistant. We incorporate a noble tin plated stranded copper wire which resist corrosion. These features will provide years of reliable service. - Page 3 NEED TECHNCIAL ASSITANCE? 877 582 3569 In The United States In Canada Dixon Bayco USA Dixon Bayco LTD. 800 High St. 2315 Bowman ST. Chestertown, MD 21620 Innisfil, Ontario, L9S 3V6 Canada Toll Free: 800 355 1991 Toll Free: 800 355 1991 Fax: 800 283 4966 Office: 705 436 1125 Fax: 705 436 6251...
- Page 4 FloTech Capteur thermo-optique SST et résistance de charge fictive (dummy) thermistance à 2 brins noir & blanc FT150S Sonde anti-déversement de remplacement thermo-optique SST FT151S Capteur thermo-optique SST avec boitier NPSM de 3” FT155 résistance de charge fictive électrique (dummy) à 5 canaux électronique...
-
Page 5: Instructions D'installation
INSTRUCTIONS D’INSTALLATION: Le modèle FloTech FT151S est installé sur un mamelon à tuyau mâle NPT de 3”. Après que le capteur soit installé retirez le couvercle. Pour ajuster la longueur du capteur, utilisez un mamelon à tuyau NPT de ¾” coupé et vissé à... -
Page 6: Instructions De Câblage
Nous vous recommandons d’utiliser le câble FT400 FloTech à 5 brins conducteurs lorsque vous installez un nouveau system. Le câble FloTech est conçu pour être résistant à l’huile, UV et à l’abrasion. Nous intégrons un fil de cuivre étamé résistants à la corrosion. Ces traits vous procureront des années fiables de service. - Page 7 BESOIN D’ASSISTANCE TECHNIQUE? 877 582 3569 10154 Feb 2010(fr)