Swann SW244-8ML Quick Start Manual page 15

How to search recorded video (Advanced Search)
There are three ways in advanced search: STATISTICS SEARCH, SMART SEARCH, and EVENT
SEARCH.
STATISTICS SEARCH
CUMULATIVE ANALYSIS shows size of total data on the HDD by period by time, week or month.
Select one category.
NOTICE
– recorded data(blue) /
The descriptions of moving cursor or settings see the TABLE 1 (8 Page) of front page.
SMART SEARCH
NOTICE
SHOW MOTION DETECTION
- Areas where motion is detected are in Cyan boxes on search screen.
SHOW REGION OF INTEREST
- Areas where you set as a region of interest are in Green boxes on search screen.
The descriptions of moving cursor or settings see the TABLE 1 (8 page) of front page.
This STATISTICS shows the total size of recorded data by
time, week and month. Size of recorded file is proportional
with frequency of motion. Comparing with these charts, you
can search the video by date and time.
Move cursor select date and time.
The bar on the upper chart shows size of recorded
files by time.
Select a time bar you want to search.
Search time can be set by manual.
–selected position(black) /
SMART SEARCH allows user to play fast only recorded
data of selected area where a motion was detected.
Select a date on calendar and set channel time
To set motion detection areas, drag mouse or
right-click on the scene. Or move cursor and
press ENTER
controller. Select OK button to apply changes.
-cursor position(bright blue)
button with the remote
13