R2 Trigger Reset Procedure - Evolve BAMBOO GTR User Manual

R2 TRIGGER RESET PROCEDURE

If for some reason you are experiencing symptoms such as
difficulty changing speed modes, unable to turn the remote off
before the board and ability to brake but not accelerate, this is
usually caused by knocks to the remote which then moves the
triggers from its original position within the remote case.
In most cases this can be resolved by resetting the acceleration
and brake trigger settings bringing it back to factory settings.
In the event the trigger settings are required to be reset, use the
following steps:
1. Ensure the skateboard is turned off. Press the ON/OFF
BUTTON on the remote.
2. From the default screen, double click the ON/OFF BUTTON
to enter the remote menu.
3. Using the MODE 2 BUTTON, scroll down to highlight
'Product Info' and select by clicking the power button once.
1
ON / OFF
x1
2
ON / OFF
x2
/39
3
SCROLL
ON / OFF
x1