Williams-Sonoma Beckett Assembly Instructions

Pre-Assembly

Please read all instructions carefully and completely before assembly.

Assembly by two people is recommended.


Parts included:

(3) Metal frame assembly (A)

(4) Finial (B)

(8) Pole (C)

(3) Glass shelf (D)

(2) Caster w/brake (E)


Hardware/Tool included:

(4) Threaded rod (K)

(4) Nut (L)

(1) Wrench (M)

Assembly instructions
1. Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.
2. Join one of metal frame assembly (A) & four casters (E) & (F), making sure two casters w/brake are
on the same end of the metal frame assembly (A), letting the threaded rod on top of casters pass through
the holes at corner of metal frame assembly (A) and the hole of "T" washer (H), followed with hex
connector (G) to secure metal frame assembly (A) & four casters, tighten with wrench (M) provided.
(Fig. 1)
Beckett Bar Cart
Assembly Instructions




M
F
Fig. 1
1 / 2
(2) Caster (F)
(4) Hex connector (G)
(4) "T" washer (H)
(2) Hand rail (J)
E
G
H
A