Advertisement
WE'RE SURE YOU'RE GOING TO LOVE IT HOWEVER IF YOU ARE
READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING
1. If using this product with residential door openers, this product must be used only with
door openers manufactured after 1993 utlilze photoelectric sensors. The photoelectric sen-
sors are always located on or near the bottom of the door track.
2. To reduce the risk of SEVERE INJURY to persons: DO NOT enable your iQ3 Universal
Garage Door Controller if operating either one-piece garage door or swinging doors. The
Tailwind iQ3 is only to be enabled on a sectional type garage door.
NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifica-
tions of this transceiver are prohibited. THERE ARE NO USER SERVICEABLE PARTS.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation. This device must be installed in a way where a minimum 8" (20 cm)
distance is maintained between users/bystanders and device.
2
THANK YOU FOR PURCHASING THE
TAILWIND AUTOMATIC GARAGE DOOR CONTROLLER.
UNSATISFIED?
EMAIL US FIRST.
SUPPORT@GOTAILWIND.COM
WE'LL RESOLVE THE ISSUE WITH YOU QUICKLY AND
PROFESSIONALLY TO GET YOU BACK ON THE ROAD.
MORE SUPPORT CAN BE FOUND AT
WWW.GOTAILWIND.COM/INSTALLATION
NOTICE
USERS MANUAL
Advertisement
