Razor Crazy Cart Installation Instructions page 2

Step 3
Carefully turn the unit over and using two (2) 16 mm
wrenches, remove both locknuts on the front axle
bolt (Figure 3a) then remove the axle bolt (Figure 3b).
Figure 3a
Step 5
Reverse steps 1 through 4 to install replacement wheel/chain.
Refer to pg. 6 in the Owner's Manual for front wheel hardware sequence
ATTENTION: Charge battery 12 hours before initial use.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM PST.
Figure 3b
2
Step 4
Carefully remove the chain from around the wheel
sprocket (Figure 4a) and remove wheel from the
front fork. If replacing the chain, also remove the
chain from around the motor shaft (Figure 4b).
Install replacement wheel/chain.
Figure 4a Figure 4b
140131