Basic Operation; Menu Operation - Naxa NTS-2420 User Manual

BASIC OPERATION

MENU OPERATION

Input Setup
Press INPUT on the remote control to enter the "INPUT SOURCE" menu. The follow-
ing options will appear for you to select: "TV", "AV", "Component", "DVD", "HDMI1",
"HDMI2", "Media".
Use the arrow keys to select an input source and press ENTER to confirm.
Channel Setup
There are four ways to select a channel:
1. Use the number keys and ENTER key on the remote control to select a channel
directly. (To select channel 90, Press 9 - 0 - ENTER.)
When you use the number buttons, you can directly select channels that were either
erased or not memorized.
2. Use CH+/- on the remote control or on the TV to select a channel.
When you press the CH+/- keys, the TV changes channels in sequence. You will see
all the channels that the TV has memorized. You will not see erased channels.
3. Press CH RTN to return to the previous channel. Press it again to return to the cur-
rent channel.
To quickly switch between two channels that are far apart, tune to one channel, then
use the number keys to select the second channel. Then use the CH RTN button to
quickly alternate betwen them.
4. Select channels from the Channels List or Favorites List.
Press ENTER to choose from the Channel List or Favorite List menu.
Volume Adjustment and Mute Setup
Press VOL+/- on the remote control or the TV to display the Volume Menu.
Adjust the volume of the TV between 0 and 100 by using VOL+/- keys.
19