Related Manuals for Naxa NTS-6500K
Summary of Contents for Naxa NTS-6500K
- Page 1 65" CLASS LED UHD Smart TV MODEL NO.: NTS-6500K Instruction Manual PLEASE READ CAREFULLY BEFORE USE...
- Page 2 If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.
- Page 3 Safety Information WARNING To prevent fire and/or electric shock, do not use this plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade expose. Do not expose this appliance to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS •...
- Page 4 Important Safety Precautions SAFETY Please, immediately pull out the AC power plug if there is an abnormal sound or smell or the LED TV has sound but no picture, and contact after sales support. The LED TV should be kept free from rain, moisture and dust to prevent electrical shock and short circuits.
- Page 5 Important Safety Precautions SAFETY Do not place the power cord or other cables across a walkway in case it is trampled on. Do not overload the power cord or power socket. When the power plug is used to disconnect and connect the device, it should be placed easily into the power source.
-
Page 6: Table Of Contents
Table of Contents Introduction Features Specifications Accessories General Description 9-12 Overview of Front and Back Panel Overview of Back Panel Overview of Remote Control Installing Batteries in Remote Control Antenna Connection External Connection 13-19 Connecting VCR Connecting DVD Player/Set-Top Box Connecting Digital Audio System/Headphone Connecting USB/Local Area Network Connecting DVD Player/Set-Top Box via HDMI... -
Page 7: Introduction
Introduction Feature • TV adopts LED display screen • UHD TV compatible (480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p) • Support American TV Standard 8VSB/Free 64/256QAM, NTSC System, ATSC System • Connect to computer directly to realize TV/monitor combo •... -
Page 8: Specifications
Introduction Specifications Display Screen Type Color Active Matrix LED Display Model NTS-6500K Maximum Resolution 3840 x 2160 Image Control Fine Digital Control Power Supply AC 100-240V~ 50/60Hz TV Receiving System NTSC System, ATSC System Frequency Range Antenna 2~69, Cable 2~125... -
Page 9: Accessories
Accessories Please make sure that the following items are included with your LED TV. If any of the following items are missing, contact your dealer. Remote Control & Owner’s Instructions Batteries (AAA x2) General Description Overview of front and back panel 1. -
Page 10: Overview Of Back Panel
General Description Overview of back panel 1. Power input (AC) 2. OPTICAL: Connect to a Digital Audio device. 3. LAN (RJ45): Connect to the local network through a LAN cable. 4. HDMI 2 / 3: Connect to the HDMI jack of a device with a HDMI output. 5. -
Page 11: Overview Of Remote Control
General Description Overview of remote control 1. STANDBY: Switch a LED TV when at standby mode or vice versa. 2. SOURCE: Press to change input source. 3. Number key (0-9): Press 0-9 to select a TV channel directly when you are watching TV. The channel changes after several seconds. -
Page 12: Installing Batteries In Remote Control
General Description Installing Batteries in the Remote Control Installing Batteries Battery Cover 1. Open the back cover. Point the remote towards the remote control sensor of this TV and use it 2. Insert two AAA size batteries within 6 meters. in the correct polarity. -
Page 13: External Connection
External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. VCR Rear Panel RF Cable (Not supplied) Video Cable (Not supplied) Audio Cable (Not supplied) -
Page 14: Connecting Dvd Player/Set-Top Box
External Connection Connecting DVD Player / Set-Top Box The rear panel jacks on your TV make it easy to connect a DVD Player to your TV. DVD Player / Set-Top Box Audio Cable (Not supplied) Component Cable (Not supplied) Component Video separates the video into Y (Luminance (brightness), Pb (Blue), and Pr (Red) for enhanced video quality. -
Page 15: Connecting Digital Audio System/Headphone
External Connection Connecting Digital Audio System / Headphone The rear panel jacks on your TV make it easy to connect a digital audio system to your TV. Digital Audio System Headphone cable (Not supplied) Optical Cable (Not supplied) 5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. We recommend the use of cables with a Ferrite Core. -
Page 16: Connecting Usb/Local Area Network
External Connection Connecting USB / Local Area Network USB device (Not supplied) LAN (RJ45) cable (Not supplied) Connect a USB 2.0 memory device into the USB slot of your TV for playback of multimedia files. 1. This USB slot only supports music (MP3) and photo (JPG) multimedia files playback. 2. -
Page 17: Connecting Dvd Player/Set-Top Box Via Hdmi
External Connection Connecting DVD Player / Set-Top Box via HDMI This connection can only be made if there is an HDMI output connector on the external device. HDMI Cable (Not supplied) What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. -
Page 18: Basic Operation
Basic Operation Turning the TV On and Off How to Turn the TV On or Off 1. Insert the power cord plug into a polarized AC outlet. 2. Press the POWER (or STANDBY) button on the remote control or on the LED TV. 3. -
Page 19: Osd Menu Operation
OSD Menu Operations Input Source Selection 1. Press the SOURCE button to display the input source list. 2. Use the up and down buttons to select the input source you want to watch. 3. Press the OK/ENTER button to enter the input source. First Time Installation If this is your first time turning on this TV, Setup Wizard will appear on the screen. - Page 20 OSD Menu Operations First Time Installation Step 3: Time Zone Select the time zone of your local region. Step 4: DST Turn on/off daylight saving time. Step 5: Network - Select the Wi-Fi or Wired network according to which type of network is available for you. You may need to input a password if the Wi-Fi account is encrypted.
-
Page 21: Home Of Smart Tv
OSD Menu Operations Home of Smart TV ● Before using Smart function, please connect a Wi-Fi or Wired network through “First Time Installation” or OSD menu (press MENU button and go to “Network”). ● Press HOME button on Remote Control to enter the HOME page of Smart TV. (Notice: The Home page of Smart TV may vary due to software update.) 1. -
Page 22: Basic Operation
OSD Menu Operations Basic Operations Press INPUT button on the remote control and enter “TV” mode before following operations: Common procedure for initial settings - Press MENU button on the remote control to display the main menu. - Press UP/DOWN/LEFT/RIGHT navigation buttons to move the cursor. - Press OK/ENTER or RIGHT navigation button to enter submenu. -
Page 23: Sound
OSD Menu Operations Sound 1. Sound Mode - Press UP/DOWN/LEFT/RIGHT navigation buttons to select an option. Sound Mode: available options: Standard, Music, Movie, Sport, User. Equalizer: if selected “User” in Sound Mode, you can enter equalizer and adjust the value accordingly. 2. -
Page 24: Setting
OSD Menu Operations Setting 1. Language This item is used to select desired on-screen display language. 2. OSD Time This item is used to select desired OSD menu active time. Available options: Always, 5/10/15 seconds. 3. Close Caption - Press OK/ENTER or RIGHT navigation button to enter it. - Page 25 OSD Menu Operations Setting 4. Link Setup - Press UP/DOWN navigation button to highlight it and press OK/ENTER button to enter. - Make sure the HDMI device (Amplifier, etc.) is connected correctly. - Press INPUT button on remote control to select HDMI input source. Link - CEC: turn on/off CEC Control.
-
Page 26: Lock
OSD Menu Operations Lock Input the factory default password “0000” using number buttons on remote control. Note: If you forget the password, please use the universal password “8899”. 1. Lock System This item is used to turn on/off Lock System. 2. -
Page 27: Program
OSD Menu Operations 9. Block Unrated TV This item is used to block unrated TV. 10. Hotel Mode - Press OK/ENTER or RIGHT navigation button to enter it. Hotel Enable: turn on/off Hotel Mode. Max Volume: set the maximum volume level. Power On Mode: select the power on mode. -
Page 28: Network
OSD Menu Operations Network 1. Wi-Fi - Press OK/ENTER to enter submenu. Auto Scan - Scan available Wi-Fi account nearby. - Press UP/DOWN navigation button to select an available Wi-Fi account. - Then press OK/ENTER to display the on-screen keyboard. Use navigation buttons to input a password and select “Enter”... -
Page 29: About
OSD Menu Operations About 1. Netflix Disable Netflix or view Netflix version. 2. Deactive Vudu Deactivate this application. 3. View End-User License Agreement Enter it to view the End-User License Agreement. 4. System Information Show the system information. 5. NetReady Information Show the NetReady information. -
Page 30: Usb Operation
OSD Menu Operations USB Operation - Insert a USB memory device into USB slot before following operations. - Press INPUT button on the remote control to select USB (or Media) input source and press OK/ENTER button to enter it. - Press UP/DOWN/LEFT/RIGHT navigation buttons to select your preferred file and press OK/ENTER button to confirm. -
Page 31: Troubleshooting
Troubleshooting If you have any problem, check the countermeasures for each symptom listed below. The following symptoms may have been caused by incorrect adjustment rather than actual malfunction of the unit. If the trouble persists, contact the service center. Symptoms Possible solutions Please check the power cord is plugged in. -
Page 32: Picture Defects And The Reason
Picture defects and the reason Snowy Picture Snowy picture is usually due to weak signal. Adjust antenna or install an antenna amplifier. Double Image or Ghosts Double images are usually caused by reflections form tall buildings. Adjust the direction of the antenna or raise it. Radio Wave Interference Wave patterns are moving on the screen, which are usually caused by nearby radio transmitters or short wave receiving...