Swann Night Hawk Extra Wireless Outdoor Camera Specifications page 2

Night Hawk
Extra Wireless
Outdoor Camera
with Night Vision
Create your own security solution:
- Add to the Swann Night Hawk Wireless Outdoor Camera (SW-P-WOC) or
MicroCam II (SW-P-MC2/A) for a DIY wireless surveillance solution with no cabling required
- Ideal addition to an existing wireless security solution
Place the camera anywhere within reception range up to 100m/330ft*
- Under the eaves around the house
- Monitor the pool, yard, entrances, garage and driveway
- Protect your business, store or warehouse
Mains power adapter included
Note: IP Ratings stated on the front panel are for cameras only.*Actual transmission range may vary according to location,
interference & building construction.
Technical Specifications
Camera Specifications
Image Sensor: 1/3" CMOS (8.5mm)
Video Format: NTSC (USA);
PAL (AU, UK, EU)
CMOS Total Pixels: 628 x 582pixels (PAL);
510 X 492pixels (NTSC)
Minimum Illumination: 0 Lux
Horizontal Resolution: 380 TV lines
Frequency: ISM 2400 - 2483MHz 4CH
Channels: CH1 = 2414MHz
CH2 = 2450MHz
CH3 = 2468MHz
CH4 = 2432MHz
Output Power: 10mW (3mW in USA)
Power Supply: +8VDC
Power Consumption Current: 65mA/105mA (IR ON)
Operation Temperature: 0°C-45°C (32°F-113°F)
Operation Humidity: 85% RH
Dimensions (W) x (L) x (H): 53 x 43.5 x 64mm
(2" x 13/4" x 21/2")
Weight: 197g (7oz)
Unobstructed Effective Range: 100m*
Package Contents
2.4GHz Night Hawk Color Camera
1 x Power Adapter
1 x 9V battery
Quickstart Manual
*Actual transmission range may vary according to location,
interference & building construction.
How the extra camera works:
Extra
Antenna
Separate Wireless Receiver
Power Adapter
www.swannsecurity.com
Please note that the information
contained within this document is
subject to change without notification.