Trouble Shooting - Pyle Nutrichef PKTEWC Series Manual

IX. TROUBLE SHOOTING
PROBLEM
The wine cooler will not
operate
The wine cooler is not cold
enough.
The wine cooler vibrates while
operating.
The wine cooler produces a
lot of noise.
The wine cooler will not close
properly.
The LED display does not work.
There is an LED display error.
The buttons do not function.
Frost or ice developed inside
the wine cooler.
POSSIBLE CAUSES
• The unit may be plugged in using a different
voltage. Also, the circuit breaker may be
tripped or there is a blown fuse.
• Check the temperature control settings, as
the external environment may be too hot.
• The door may be opened too frequently.
• The door is not closed completely.
• The door seal does not seal properly.
• The wine cooler does not have sufficient
clearance.
• Make sure the unit is leveled.
• The unit may not be leveled.
• Check the fan.
• The unit may not be leveled.
• The doors are reversed and not properly
installed.
• The seal is weak.
• There may be a problem with the main
control board.
• There is a problem with the plug.
• There is a PCB problem.
• The temperature control panel may be
damaged.
• Ambient temperature too low.
• The wine cooler needed to be restarted
9
www.PyleUSA.com