Troubleshooting/ Specifications - LG LPD103 Manual

LPD103-A0_ENG_GF_8354 7/23/08
Troubleshooting
Symptom
POWER
No power The power cord is not plugged in.
RADIO
No sound The function switch is not set to
the Radio mode.
Some noise There are electronic devices near
occurs. the player.
The antenna is positioned poorly
DVD/CD
The unit does not An unplayable disc is inserted.
start playback
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The TV is not set to receive the
No picture
video signal
REMOTE CONTROL
Remote control The remote control is not
does not work
pointed at the remote sensor
properly. of the unit directly.
TAPE
Record protect tabs are removed.
Unable to record
16 DVD RADIO CASSETTE ] USER GUIDE
1:55 PM Page 16
Cause Correction
Plug in the power cord.
Set the switch to the Radio mode.
Set the player far from the
devices.
Adjust its position
Insert a playable disc.
Place the disc with the playback
side down.
Place the disc on the disc tray
correctly inside the guide.
Clean the disc.
select the apporate video input
model on the TV so the picture
from the unit appears on the TV
Point the remote control the
remote sensor directly of the
unit.
Cover holes on back edge of tape
with tap.
Specifications
General
Power supply Refer to the back panel of the unit.
Power consumption Refer to the back panel of the unit.
Net Weight 3.6 kg
External dimensions (W x H x D) 475 x 180 x 260 mm
Output Power (T.H.D 10%) 5W X 2
6 Ω x 2
Speakers
CD/DVD
Laser Semiconductor laser,wavelength
Singnal system PAL625/50,NTSC 525/60
Frequency response(audio) 100Hz - 18kHz
Dynamic range (audio) More than 85 dB
Tuner FM
Tuning Range 65 - 74 MHz, 87.5 - 108 MHz
or 87.5-108 MHz
Intermediate Frequency 10.7 MHz
Cassette tape player
Recording System 4 Tracks 2 channel stereo
Frequency Response 125 - 8000 Hz
Signal to Noise Ratio 43/45 dB (REC/PLAY)