Related Manuals for AlpicAir YV1L1
Summary of Contents for AlpicAir YV1L1
- Page 1 User’s Manual of Remote Controller Owner's Manual Air Conditioners Thank you for choosing Air Conditioners, please read this owner’s manual carefully before operation and retain it for future reference.
- Page 2 Preface For correct installation and operation, please read all instructions carefully. Before reading the instructions, please be aware of the following items: (1) For the safe operation of this unit, please read and follow the instructions carefully. (2) During operation, total capacity of indoor units should not exceed the total capacity of outdoor units.
- Page 3 User’s Manual of Remote Controller Remote Controller YV1L1 Button name and function introduction Button name Function ON/OFF Turn on or turn off the unit Set fan speed ▲/▼ Set temperature and time MODE Set operation mode Set quiet function Set health function and air function...
- Page 4 User’s Manual of Remote Controller Set up&down swing status X-FAN Set X-FAN function TIMER ON Set timer on function TIMER OFF Set timer off function SAVE Set energy-saving function SLEEP Set sleep function LIGHT Set light function CLOCK Set clock of the system I FEEL Set I FEEL function Switch temperature displaying type on the unit’s display...
- Page 5 User’s Manual of Remote Controller simultaneously, and then will blink for three times. Setting temperature (2). In unit on status, press ▲ button to increase set temperature and press ▼ button to decrease setting temperature. Note: Under auto mode and when absence function is on, temperature adjustment is invalid.
- Page 6 User’s Manual of Remote Controller In unit off status, press ▲ button and button to switch between simple swing mode and fixed-angle swing mode. on the remote controller will be blinking for 2 seconds during switching. Setting quiet function (5). In unit on status, press button to adjust quiet status in following sequence: : auto quiet function is on;...
- Page 7 User’s Manual of Remote Controller When the indoor unit is connected with fresh air valve, air function setting can control the connection of fresh air valve, which can control the fresh air volume and improve the air quality inside the room. Setting X-FAN function (8).
- Page 8 User’s Manual of Remote Controller zone displays the limiting value set in last time. Press ▲ or ▼ button to adjust the energy-saving limiting value to preset value. Pressing SAVE button again, energy-saving function is turned on. displayed while is not displayed. When energy-saving function is turned on, set temperature can only be adjusted within the energy-saving limiting value.
- Page 9 User’s Manual of Remote Controller In unit on status, receiver light board or wired controller is defaulted to display set temperature. Press TEMP button to view indoor or outdoor ambient temperature. When is displayed, it means the displayed temperature is indoor ambient temperature.
- Page 10 User’s Manual of Remote Controller Adjust set temperature to 30℃; Within 5 seconds, press ▼ button and then press ▲ button repeatedly for three times; After finishing setting, “UC” is displayed on receiver light board for 5 seconds and “MASTER” icon is displayed on wired controller. Switching temperature scale (5).
- Page 11 User’s Manual of Remote Controller batteries. ③ . The operation of remote controller should be performed within its receiving range. ④ . The remote controller should be placed 1m away from the TV set or stereo sound sets. ⑤ . If the remote controller does not operate normally, please take the batteries out and reinsert them after 30 seconds.
Need help?
Do you have a question about the YV1L1 and is the answer not in the manual?
Questions and answers