Table of Contents
Advertisement
conditions to illuminate the area where you want
to work. The LED lamp (8) will be lit automatically
as soon as you press the ON/OFF switch (3)
9. Technical data
Rechargeable battery:
Rating voltage ( DC)
No-load speed:
Maximum torque
Battery charging voltage:
Battery charging current :
Mains voltage for charger:
WARNING! This machine produces an
electromagnetic field during operation. This field
may under some circumstances interfere with
active or passive medical implants. To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
physician and the medical implant manufacturer
before operating this machine.
10. Cleaning and maintenance
Always remove the battery from machine before
doing any work on the cordless wrench!
10.1 Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device
immediately each time you have finished using it.
• Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic
parts of the equipment. Ensure that no water can
seep into the device.
20V d.c. /3Ah Li-ion
DC 20 V
0-1600/0-2100/0-2500/min
300 Nm
21 V d.c.
3500 mA
220-240VAC 50-60Hz 90W
10.2 Maintenance
Please charge the battery pack regularly, for
example, once every 6 months.
11. Repairs
Only use accessories and spare parts
recommended by the manufacturer. If the
equipment should fail some day in spite of our
quality controls and your maintenance, only
have it repaired by an authorized electrician.
12. Environmental protection
End of life electrical equipment must not
be placed in household waste. Please
take it to a return point. Find out about
your nearest return point from your
council or sales outlet.
9
Advertisement
Table of Contents
