Using Memory; Viewing Logs; Viewing And Resetting Log Totals - Suunto LUMI User Manual

Suunto stopwatch user guide

Table of Contents

8 USING MEMORY

You can view data for a specific log in

. To enter

, press [Mode] for

2 seconds - the menu icon in the upper right corner will blink twice.

, press [Mode] to enter

. In

, press [Up] or [Down Light]

MEMORY

to scroll through the log listings. Press [Mode] to view the chosen log. Press

[Up] or [Down Light] to scroll through the data list. You can view the overall

duration, the altitude graph and the highest and lowest point information.

What s neat about the altitude graph is that you are able to view that entire

log with [Mode]! Use [Up] and [Down Light] to control the speed or direction

of the scrolling graph. When you start to scroll, the corresponding time will be

displayed below the scrolling graph. To stop scrolling, press [Mode].

NOTE: Your Suunto Lumi has the capacity to store up to 5 logs. When you start

recording your 6th log, the first log erases from the memory while the second log

moves up into that first spot. Each log can be recorded for a maximum of 33 hours.

The altitude information is recorded every 30 seconds.

Log totals is an interesting function because you can see the combined total

of each and every log recorded since the last log totals reset. You can view the

various cumulative totals for all of your logs in

. To enter

, press

[Mode] for 2 seconds - the menu icon in the upper right corner will blink twice.

Table of Contents

Lumi florette Lumi terra