Download Print this page

Coopers of Stortford F948 Instructions For Use

Advertisement

Quick Links

GO STITCH
Please read and retain these instructions for future reference
Parts
For your safety:
The needle is sharp, use care when working with the needle to avoid injury.
Keep away from children.
When not in use the machine should always be kept in a locked position.
Insert/Replace Batteries (4 X AA batteries not included):
Note: Make sure the machine is in the locked position prior to battery
replacement.
To open the compartment, press down on the arrow with your thumb and push in
the direction of the arrow (Figure 1).
Insert 4x AA batteries in the battery compartment. (Figure 2).
Once the batteries are inserted, replace battery cover by sliding it back and
clicking into place.
AC/DC adapter (not included)
Can be used with an Adapter, must be 6V 800mA (not included. Plugging in an
adapter that has a different rating could damage the machine and adapter.
F948
Instructions for Use
Size: 21cm x4.7cm x7.2cm
Weight: 210g
1. Set screw
2. Fastening plate
3. Bobbin
4. Rotary wheel
5. Battery compartment
6. AC/DC Adapter slot
7. Lock/Unlock
8. Power switch
9. Needle arm
10. Tension control
11. Threader
12. Extension spindle
Accessories:
2 extra needles
3 extra bobbins with thread
v001: 18/02/19

Advertisement

loading

Summary of Contents for Coopers of Stortford F948

  • Page 1 GO STITCH F948 Instructions for Use Please read and retain these instructions for future reference v001: 18/02/19 Size: 21cm x4.7cm x7.2cm Weight: 210g Parts 1. Set screw 2. Fastening plate 3. Bobbin 4. Rotary wheel 5. Battery compartment 6. AC/DC Adapter slot 7.
  • Page 2 GO STITCH F948 Instructions for Use Please read and retain these instructions for future reference v001: 18/02/19 Directions for Use: Ensure the machine is in the locked position (Figure 3). Raise the needle arm to the highest position by turning the rotary wheel (Note: The rotary wheel can be turned in either direction (Figure 4).
  • Page 3 GO STITCH F948 Instructions for Use Please read and retain these instructions for future reference v001: 18/02/19 Threading the Machine Note: The spring must be in place before installing bobbin. Thread should flow from the top right of the bobbin or spool.