Advertisement
BEFORE INSTALLATION
INSTALLATION NOTES
Install this product according to the installation guide.
Our products must be installed by certified professional only and according to our installation
guide as well as federal, provincial/state and local building codes and regulations.
The diagrams in this guide are not construction plans. They are visual aids.
For best results, the floor must be level.
INSTALLATION REQUIREMENTS
Please read the instructions carefully and follow the specified guidelines to avoid any damage to the
fixture.
1. The owner/user of the product must keep this information for future reference.
2. Consult local building codes to make sure the installation complies with standards.
3. Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure it is in
good condition. Should inspection reveal any damage or defect in the finish, contact your
distributor. The warranty does not cover damages or defects of the product finish once it has
been installed. DADO's responsibility for shipping damages ceases upon delivery of the product
in good order to the carrier.
4. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
5. Verify that all dimensions on the plan are the same as the ones of the unit.
DADO pursues a policy of continual development and improvement and as such, product specifications
may be changed without prior notice. All dimensions listed herein are only intended as a guide.
TECHNICAL SUPPORT ASSISTANCE
If further assistance is required, please contact:
Product Support at +27 (0)12 803 9431 (08:00 - 17:00 GMT)
Email
support@dadoafrica.co.za
www.dado.co.za
ADHERE TO ALL LOCAL BUILDING AND PLUMBING CODES. THE DIAGRAMS IN THIS GUIDE ARE NOT CONSTRUCTION PLANS; THEY ARE VISUAL AIDS.
3
Advertisement
