TABLE OF CONTENTS Box contents Product Specifications Your watch Quick start with your smartphone Discover the key functions How to change the battery How to change the strap Upgrade your watch firmware Reset Declaration of conformity...
5ATM Waterproof Strap: adaptable to 150-220mm wrists Case Diameter: 40mm Operating temperature: 0℃- 50℃ Weight —— MATE2: 61.2g Colors —— MATE2: black, white, black & white and white & black MATE2+: 56.7g MATE2+: black and khaki Sensors & Technology Quartz Oscillator...
QUICK START WITH YOUR SMARTPHONE Scan the QR code to download the NOERDEN App or search for NOERDEN in the App Store or on Google Play. TURN ON YOUR WATCH Press and hold the button for 3 seconds. The indicator light will flash quickly and the watch will vibrate.
Page 6
1. Turn on your phone's Bluetooth and hold your watch close to the phone until the device is connected. 2. In the NOERDEN App, go to the 'Device' page and click 'Add a new device'. Follow the instructions: find your watch 'NOERDEN-MW' and connect it.
When using your watch for the first time, you need to set the time of your new watch. 1. In the NOERDEN App, go to the 'Device' page and then click 'Smart Time Calibration'. 2. Enter the time displayed on your watch onto your phone's interface. The time will then automatically calibrate.
Page 8
Disable Bluetooth Mode The watch automatically starts Disable Bluetooth Mode when the bluetooth is disconnected for more than 2 hours, meaning Bluetooth is off. You can also manually enable the Disable Bluetooth Mode in the App. Settings Disable Bluetooth Mode Note: When you press the button once to check the Bluetooth status, Bluetooth will automatically switch on and your watch will reconnect to your phone if it was in Disable Bluetooth Mode.
Page 9
Note: your watch must be connected to your phone via Bluetooth. This function must be switched ON in the 'Device' menu of the NOERDEN App and you must accept the access. Messages and Notifications When you receive a message or notification, the indicator light will flash in green once and your watch will vibrate once.
Silent Alarm To wake-up gently, you can set a silent alarm time on the NOERDEN App. Your watch will vibrate for 8 seconds. To turn it off, press the button once.The indicator light will flash once in red and your watch will vibrate once.
Page 11
NOERDEN App to access your phone's camera. Music Control In the NOERDEN App, go to the 'Device' menu to switch on the Music Control function. After that, you can tap your watch glass to control your music play.
Page 12
Battery You can check the battery level of your watch in the 'Device' menu of the NOERDEN App. When your watch's battery is low, if you press your watch button, the indicator light will flash in red for 5 seconds and all smart functions will be turned off.
HOW TO CHANGE THE BATTERY When the battery is low, your watch's Bluetooth is automatically turned OFF. To continue to enjoy all smart functions, you should change the battery as soon as possible. We recommend you to go to a local watch shop to replace the battery CR2032. If you wish to do it yourself, you can follow the instructions below.
5. Use a sharp headed tool to gently press the reset button once, the indicator light will then flash green once. 6. Use the same method to put the battery retainer back in. 7. Install the watch case and turn it until Indicator light flashes green once it's tight.
UPGRADE WATCH FIRMWARE 1. To update your firmware go to the NOERDEN App > Profile > Settings > Check for firmware upgrade. 2. Your phone will download the new firmware version and upload it to your watch. 3. During the installation, the indicator light of your watch will continuously flash in red.
Page 16
For more information, go to the FAQ page in the App or on our website...