Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NOERDEN LIFE2
Summary of Contents for NOERDEN LIFE2
- Page 1 For NOERDEN SMART WATCH - LIFE2 / LIFE2+ User Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Box contents Product Specifications Your watch Quick start with your smartphone Discover key functions How to change the battery How to change the strap Upgrade watch firmware Reset Declaration of conformity... -
Page 3: Box Contents
LIFE2+: 70.4g Strap LIFE2: adaptable up to 220mm wrist LIFE2+: adaptable up to 240mm wrist Color LIFE2: black, white, red, blue and navy LIFE2+: full black and full grey Sensors & Technology Quartz Oscillator Activity G-sensor: day and night movement sensor... -
Page 4: Your Watch
Connectivity & Compatibility Connectivity: Bluetooth 4.1 Compatible Devices: iPhone 5 and above, Android devices Operating Systems: iOS 9.0, Android 4.3 and above Battery Battery Type: button battery CR2032 Normal Capacity: 240mAh Input: 3V 20mA Smart Functions & Data World Time Synchronization Find My Phone Camera Remote Vibration Notifications... -
Page 5: Quick Start With Your Smartphone
QUICK START WITH YOUR SMARTPHONE Scan the QR code to download NOERDEN APP or search for NOERDEN on the iOS or Android APP store. TURN ON YOUR WATCH Press and hold the button for 3 seconds. The indicator light will flash quickly and the watch will vibrate. - Page 6 1. Turn on your phone's Bluetooth and hold your watch close to the phone until the device is connected. 2. In NOERDEN APP, go to 'Device' menu and click 'Add a new device'. Follow the instructions: find your watch 'Noerden-LW' and connect it.
-
Page 7: Discover Key Functions
When using your watch for the first time, you need to set the time of your new watch. 1. In the NOERDEN APP, go to the 'Device' menu and then the 'Smart Time Calibration'. 2. Enter the time displayed on your watch onto your phone's interface. The time will then automatically calibrate. - Page 8 Disable Bluetooth Mode The watch automatically starts Disable Bluetooth Mode when the bluetooth is disconnected for more than 2 hours, meaning Bluetooth is off. You can also manually enable the Disable Bluetooth Mode in the APP. Settings Disable Bluetooth Mode Note: When you press the button once to check the Bluetooth status, Bluetooth will automatically switch on and your watch will reconnect to your phone if it was in Disable Bluetooth Mode.
- Page 9 Note: your watch must be connected to your phone via Bluetooth. This function must be switched ON in the 'Device' menu of the NOERDEN APP and you must accept the access. Messages and Notifications When you receive a message or notification, the indicator light will flash in green once and your watch will vibrate once .
- Page 10 Silent Alarm To wake-up gently, you can set a silent alarm time on the NOERDEN APP. Your watch will vibrate for 8 seconds. To turn it off, press the button once. The indicator light will flash once in red and your watch will vibrate once.
- Page 11 Camera Remote In the NOERDEN APP, go to the "Device" menu and then "Camera Remote". A camera page will open. Shake your watch or press the button to take a picture. Press once Note: Your watch must be connected to your phone via Bluetooth, and you must accept NOERDEN APP to access your phone's camera.
-
Page 12: How To Change The Battery
Battery You can check the battery level of your watch in the 'Device' menu of the NOERDEN APP. When your watch's battery is low, the watch hands will automatically set to 12 o'clock. When this occurs, if you press your watch button, the indicator light will flash in red for 5 seconds and all smart functions will turn off. - Page 13 3. Take out the old battery by using tweezers or a flat tool thinner than 2mm, carefully lift and remove the battery. 4. Install the new battery (CR2032) in the same way as removing it. Once it is properly installed, the indicator light will flash red once Indicator light flashes red once...
-
Page 14: How To Change The Strap
UPGRADE WATCH FIRMWARE 1. To update your firmware: go to the NOERDEN APP > Profile > Settings > Check for firmware upgrade. 2. Your phone will download the new firmware version and upload it to your watch. -
Page 15: Reset
You will have to restart your watch after the restoration. DECLARATION OF CONFORMITY The undersigned, Noerden (Shanghai) Information Technology Co., Ltd declares that the electrical radio equipment types of the Noerden Smart Watch, Models LIFE2/LIFE2+, comply with the 2014/53/EU directive. The complete text is available at... - Page 16 For more information, go to the FAQ page on our website.