Acura 2010 RL Owner's Manual page 167

Driving Position Memory System
MEMORY MEMO BUTTON
BUTTONS
3. Press the MEMO button on the
driver's door. You will hear a beep.
The indicator in the memory
buttons (1 and 2) will blink.
Immediately press one of the
memory buttons (1 or 2) until you
hear two beeps. The indicator in
the memory button will stay on.
The current positions of the
driver's seat, steering wheel, and
outside mirrors are now stored.
164
To cancel the storing procedure
after pressing the MEMO button:
Do not press a memory button
within 5 seconds.
Readjust the seat or steering
position.
Readjust the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory.
All stored driving positions will be
lost if your vehicle's battery goes
dead or is disconnected.
2010 RL
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
Make sure the shift lever is in
1.
Park.
2. Press the desired memory button
(1 or 2) until you hear a beep.