Setting The Time Before The Door Alarm  Is Triggered; Switching The Sensor Tone  On / Off; Setting The Volume/Switching Alarms And Audible Tones  On/Off - Miele KS 28423 D ed/cs Operating And Installation Instructions

Setting the time before the door
alarm  is triggered

The refrigeration appliance has a door
alarm. If an appliance door has been
left open for a longer period of time, an
alarm will sound (if this has not been
switched off; see "Setting the volume/
Switching alarms and audible tones on/
off") and  will light up in the display

(see "Door alarm").
You can set the duration before the
door alarm  sounds with the seg-

ment bar:
The duration can be set in 30 second
increments, starting with 30 seconds
(level 1 = 1 filled-in segment) up to a
maximum of 3 minutes 30 seconds
(level 7 = 7 filled-in segments).
Selecting further settings
Switching the sensor tone 
off 

Every time a selectable field is touched
a sensor tone sounds. You can switch
this on  or off 

Setting the volume/Switching alarms
and audible tones  on/off
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the max-
imum volume is set.
If no segments are filled in, the alarm
and audible tones are switched off. 
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for temper-
ature alarms, error messages, inter-
ruptions to the power supply or a set
minute minder cannot be switched off.
on /

.

33