Page 1
FD2401 540304 FAST SHREDDER Original Operation Manual WARNING! Read the instructions before using the product Before initial start-up, please read through these operating instructions carefully prior to using the machine. Keep the instructions safe and pass them on to any subsequent user so that the information is always available.
Intended Purpose Content The shredder is intended for shredding fibrous Intended Purpose ..........5 Safety Precautions ..........5 and wood-related materials such as hedge and Symbols Used In The Instructions..... 5 tree cuttings, branches, bark and pine cones. Symbols On The Shredder ........ 6 Any use not expressly permitted in this manual Important ..............
Symbols on the shredder The equipment is intended only for use in premises in which the current bearing Warning! Beware of hazards. Take capacity of the network is >=100 A per special care to avoid injury or damage. phase and which are supplied by a Read the manual.
properly secured and that guards and 10) keep all guards and deflectors in place and screens are in place. Replace damaged or in good working condition; unreadable labels; 11) do not transport this machine while the machine is running; Operation 12) switch off the machine and disconnect the plug from supply whenever you leave the 1) before starting the machine, look into the...
supplied and recommended by the manufacturer. away from other moving parts. Using third-party parts will immediately invalidate • In the event of blockages in the machine intake the guarantee. or ejection, switch off the motor and disconnect • Do not leave the shredder working unattended the machine from the mains before removing and keep it in a dry place out of children’s reach.
Technical Specifications does not work properly. Always have a damaged switch repaired by our a qualified technician. Blade-type shredder........FD2401 • Only use extension cables that have been Nominal power intake........ 2400 W approved for outdoor use and are resistant to Nominal voltage......
Switching the shredder on and off notice. All dimensions, references and information If your shredder is fitted with a long mains cable, of this instruction manual are therefore without plug it directly into the mains supply, using an guarantee. Legal claims, which are made on the RCD device if necessary.
Sharpening, turning or replacing Wear ear and eye protection the blades Before starting to service or clean the unit, turn off the unit, pull the power plug, and Wear hand protection wait until the blade comes to a standstill. Take care. Risk of injury from electric shock, fire and rotating •...
• Check that the nuts, bolts and screws are tight. • Check the covers and guards for damage and improper attachment. If necessary, change the components • Keep the shredder in a dry place out of children’s reach. Do not cover the shredder in nylon bags, as moisture may develop.
Trouble Shooting Problem Possible Cause Remedy Check the socket, cable, lead and plug for damage, and if necessary, have any No mains power supply damage repaired by qualified repair personnel. Motor will Wait until the motor has cooled down, not start Overload protection tipped then press the Reset button and restart the unit.
Page 14
of exact model number, year of Guarantee automatically lapses manufacture and appliance serial number. 1. Modifications are made to machine without This guarantee does not cover: manufacturer’s approval. 1. Abnormal use not conforming 2. Non-original or unapproved with instruction manual parts are installed.
No.8, Ting Rong Street, 215122 Suzhou, Jiangsu Province CHINA Declare that the product SHREDDER 540304 (MODEL: FD2401) Complies with the essential health and safety requirements of the following directives: - The Machinery Directive 2006/42/EC - The EMC Directive 2004/108/EC - The Outdoor Noise Directive 2000/14/EC & 2005/88/EC...