Page 2
ENGLISH 20 FUNCTIONS AND OTHER FEATURES 1. 20 FUNCTIONS 1. Two automatic training programs in accordance to age input. F P1 (Fat Burning Program), F P2 (Cardiovascular Strength Building Program) 2. F P3 (Freely programmable Target Zone and Exercise time setting) 3.
Page 3
ENGLISH 6. Place the plastic cover back on and assemble the back cover onto the front case. 7. Tighten the screws and promptly dispose of the old battery. NOTE: 1. Do not lose any O-rings or the metal spring. 2. Removing the watch battery will erase all data recorded and reset the watch receiver.
Page 4
ENGLISH To check for proper operation, the symbol on the watch will flash upon receiving a pulse signal. The watch will then take a few seconds to display the initial current heart rate NOTE: 1. If you get irregular pulses, please execute ‘’RESET’’ to clear all records. Hold the S KEY and the M KEY down simultaneously for 8 seconds.
Page 5
ENGLISH 3. Exercise time range: 0-9:59:59 (H/M/S) FP4: Selection of Average Heart Rate Calculation Period 6 optional calculation periods of 10 , 20 , 30, 40 , 50 and 60 minutes are provided for average heart rate calculation and display. Press S KEY to select the period you want, then press the M KEY to CLOCK MODE.
Page 6
ENGLISH EL Backlight Press EL key to illuminate the watch for 3-4 seconds. Remark: 1. Battery consumption will lessen with long term use of the EL Backlight 2. EL Backlight is not visible in daylight 8. AVERAGE HEART RATE MODE A: Current heart rate display B: Percentage of current cardiovascular strength compared with your age’s MPL...
Page 7
ENGLISH A: Current heart rate display B: Percentage of current cardiovascular strength compared with your age’sMPL C: High Target Zone Limit D: Low Target Zone Limit E: Stopwatch display F: Current cardiovascular strength level MAXIMUM HEART RATE MODE sybol H: Target Zone indicator (same as CLOCK MODE) I: AM/PM for 12 Hour format Weak battery symbol (replacement required) Visual alarm symbol...
Page 8
12 months from the date of supply of GIMA. During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected parts due to production reasons. Labor costs and personnel traveling expenses and packaging not included.
Need help?
Do you have a question about the 28400 and is the answer not in the manual?
Questions and answers