Download Print this page

Sealey SA92.V3 Instruction Manual page 3

Air tyre buffing kit

Advertisement

4. OPERATING INSTRUCTIONS
r WARNING! Ensure you read, understand and apply safety instructions before use.
Note: Numbers shown in brackets refer to item numbers in the parts list.
r WARNING! Disconnect from air supply before changing accessories or servicing.
4.1.
The buffing wheel (34) attaches directly to the arbor (28) and should be tightened using the
wrench (33).
4.2.
To use the grinding stones (39) screw the 10mm drill chuck (35) onto the arbor (28). Insert
the required grinding stone into the chuck and secure using the chuck key provided.
Remember to remove the chuck key.
4.3.
Depress the trigger to operate the buffing kit.
5. MAINTENANCE
r WARNING! Disconnect buffer from air supply before changing accessories, servicing or
performing maintenance. Replace or repair damaged parts. Use genuine parts only. Un
authorised parts may be dangerous and will invalidate the warranty.
5.1.
Lubricate the buffer daily with a few drops of Sealey air tool oil dripped into the air inlet to
prolong its life.
5.2.
Clean the buffing kit after use. DO NOT use damaged stone wheels.
5.3.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy check the air supply and follow instructions in
chapter 3.
b) Grit or gum deposits in the buffing kit may also reduce performance. If your model has
an air strainer (located in the area of the air inlet), remove the strainer and clean it. Flush
the buffer out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin.
Allow to dry before use.
5.4.
For a full service contact your local Sealey service agent.
5.5.
When not in use, disconnect from air supply, clean buffer and store in a safe, dry,
childproof location.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Advertisement

loading