Models 2005, 2006, 2007 - Vector 2003 Installation And Operation Manual

Parts List (Models 2005, 2006, 2007)
Ref.
No. Description
1 Casing................................................................ 1
2 Cover, front ........................................................ 1
3 Window, cover ................................................... 1
5 Roller assembly ................................................. 1
6 Clamp, hose....................................................... 4
7 Screw, cover ............................................... 2 or 3
8 Hose .................................................................. 1
10 Screw, roller ....................................................... 1
WANNER ENGINEERING, INC.
1204 Chestnut Avenue, Minneapolis, MN 55403
TEL: (612) 332- 5681 FA X: (612) 332- 6937
TOLL-FREE FAX [US only]: (800) 332-6812
www.vectorpump.com
email: sales@wannereng.com
8
W0468
Qty, per
Notes:
• Models 2006 and 2007 use 0.5 mm shims to adjust the hose
compression.
• Model 2005 uses the same style of roller assembly as Models
2002 – 2004 (see previous page.
See note.
Pump
Ref.
No. Description
16 Connector, hose ................................................ 1
17 Base ................................................................... 1
18 Bolt, mounting ................................................... 4
19 Washer .............................................................. 4
20 Washer .............................................................. 4
21 Bolt, cover .......................................................... 4
23 Support, hose .................................................... 2
24 Washer, roller mounting .................................... 1
25 Bolt ..................................................................... 4
26 Washer ................................................................
— Shim, 0.5 mm (.02 in.) ............................... 8 max
© 2004 Wanner Engineering, Inc. Printed in USA
VEC-991-2400A 10/2004, Revised 8/2007
Qty, per
Pump