Gebruikershandleiding - VelLight LEDC24 User Manual

Set more than one DIP switch on and add their corresponding values
to obtain the desired DMX address. For example: if only DIP switch 8
is on, the DMX address is 128. To obtain DMX address 19, set DIP
switches 1, 2, and 5 to on (1 + 2 + 16 = 19).
8. Technical Specifications
DMX channels
power supply
power output
output current
input signal
greyscale levels
PWM frequency
weight
dimensions
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE – The copyright to this manual is
owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent
of the copyright holder.

GEBRUIKERSHANDLEIDING

1. Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat,
als het na zijn levenscyclus wordt weggeworpen, dit toestel
schade kan toebrengen aan het milieu. Gooi dit toestel (en
eventuele batterijen) niet bij het gewone huishoudelijke
V. 02 – 29/10/2013
LEDC24
4
12-24 VDC (not incl.)
12 V < 288 W
24 V < 576 W
4 x 6 A
DMX512
256 (8 bits)
± 2000 Hz
380 g
156 x 67 x 41 mm
9 ©Velleman nv