VelLight LEDC24 User Manual page 6

Keep this device away from dust and extreme temperatures. Make
sure the ventilation openings are clear at all times.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Keep this manual for future reference.
4. Installation
Refer to the illustrations on page 2-4 of this manual.
1 DIP switches
2 DMX input
3 DMX output
4 terminals
DC+
DC–
CH1
CH2
CH3
CH4
V+
5. Test Mode
In test mode, you can set a static colour, or use changing colours at
different speeds.
Static Colour
To set a static colour:
1. Set DIP switch 10 to ON.
V. 02 – 29/10/2013
LEDC24
to select the operating mode
input [C] from external DMX controller:
computer + PC DMX console [A] or stand-
alone DMX controller [B]
to next LEDC24 device in daisy chain
connection [F]
to 12-24 VDC power supply (+) [E]
to 12-24 VDC power supply (–) [E]
to LED strip, red (channel 1) [D]
to LED strip, green (channel 2) [D]
to LED strip, blue (channel 3) [D]
to LED strip, white (channel 4) [D]
to LED strip, power [D]
6 ©Velleman nv