Advertisement
Quick Links
Important: For the first 36 hours after the initial installation, make
sure to periodically inspect for leaks while the system is running and
while it is turned off. If a leak occurs, shut off the water supply, open
up the filter faucet to release pressure from the system and contact
Hahn Filtration Technical Support at (888) 245-3114.
Thank you for choosing HAHN Filtration!
Manufactured by Sink Warehouse, LP
4601 Spicewood Springs Rd, Suite 1-100, Austin, Texas 78759
(888) 245-3114
www.hahnfiltration.com
•
HF-RO3-RM_INST_201403
Remineralizer
Replacement Instructions
MODEL HF-RO3-RM for use with HF-RO
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hahn HF-RO3-RM
Summary of Contents for Hahn HF-RO3-RM
- Page 1 If a leak occurs, shut off the water supply, open up the filter faucet to release pressure from the system and contact Hahn Filtration Technical Support at (888) 245-3114. Thank you for choosing HAHN Filtration!
- Page 2 Remove the remineralizer from the packaging Insert the white 3/8 hose that is attached to the faucet into the outlet connection of the new remineralizer by pressing the hose in until it Important: Make sure the system is not under pressure, the RO tank is completely stops completely drained and the water supply line is shut off.
Need help?
Do you have a question about the HF-RO3-RM and is the answer not in the manual?
Questions and answers