Cisco PA-2JT2 Installation And Configuration Manual page 9

Figure 2
SRAM
DIMM U5
Figure 3
SRAM
daughter
Port adapter
JT2 Port Adapter LEDs
The JT2 port adapter (see ) contains the enabled LED, which is standard on all port adapters; this green
LED goes on after system initialization to indicate that the JT2 port adapter has been enabled for
operation.
OL-3587-01
Two Port Adapters on the VIP2-40 (Horizontal Orientation Shown)
Bus connector
Port adapter
in slot 0
Two Port Adapters on a VIP2-50 (Horizontal Orientation Shown)
Bus connector
card
in slot 0
CPU Boot ROM
U6
U2
U4
Boot ROM CPU
PA-2JT2 6.3-MHz Serial Port Adapter Installation and Configuration
What Is the JT2 Port Adapter?
DRAM
SIMMs
Port adapter
in slot 1
DRAM DIMM
Port
adapter
in slot 1
9