Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Roller Pro RP-HOPPER 6
Summary of Contents for Roller Pro RP-HOPPER 6
- Page 1 USER RP·HOPPER MANUAL HOPPER E·SCOOTER...
-
Page 2: Table Of Contents
IMPORTANT NON-COMPLIANCE WITH SAFETY INSTRUCTIONS COULD CAUSE SERIOUS BODY DAMAGE AND IN EXTREME CASES, DEATH. WELCOME Thank you for your purchase of the Roller-Pro Hopper E-Scooter! The Roller-Pro Hopper E-Scooter takes the power of electricity, the style of a traditional scooter, adds them together, and tops it off with a bit of swag. -
Page 3: General Information
GENERAL INFORMATION Before operating this vehicle, please read all instructions. This manual will guide you through the functions, usage, and proper care of your Roller-Pro Hopper E-Scooter. If you have any questions or cannot find the information you need in the manual, please contact your place of purchase or our customer service center. - Page 4 Do not ride your Hopper E-scooter in ramps, curbs, slopes, slippery surfaces or try to perform acrobatics or tricks. This can cause serious injuries. Always use your Hopper E-scooter in a smooth way. Do not be aggressive as this can cause failure or an accident.
-
Page 5: Main Specifications
1.3 Disposal at End-of-Life This product must not be disposed of by incineration, landfilling, or mixing with household trash. Improper disposal of the battery contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious injuries. The substances contained inside the battery present chemical risks to the environment. -
Page 6: Parts & Features
PARTS & FEATURES What’s in the Box? 1 x Roller-Pro Hopper E-Scooter ■ 1 x Charger ■ 2 x Handles ■ 1 x User Manual ■ 4 x screws ■ Socket wrench ■ Valve connector ■ Warranty card ■ Parts: Control panel: Picture may vary from actual product... -
Page 7: Charging
1 Insert the head tube and fold out the kick 2 Install the handlebar on the head tube. stand. 3 Use the supplied hex wrench to fasten the 4 After installation you can switch the scooter on. screws on both sides. CHARGING Remove the rubber Insert the... -
Page 8: Usage
Do not, under any circumstances, use the E-scooter while it is connected to the charger. Do not charge longer than necessary. Standard charging time is approx. 3 hours. Charging longer than this may affect the battery life and/or performance. To maximize the battery life, charge it once every other month or once a week after riding. -
Page 9: Folding & Transporting
The Roller-Pro Hopper E-Scooter is designed for relatively smooth, flat terrain. ■ Until you are comfortable using the scooter, avoid operating in places with slopes, pedestrians, ■ or obstacles. A helmet as well as other Turn on the power and check Press the throttle button to protective. -
Page 10: Maintenance
MAINTENANCE Do not perform any maintenance when the power is on, or the battery is charging. After each ride, especially if you have travelled a long distance, inspect your scooter. Inspect the brakes to make sure that is working properly. ■... -
Page 11: Harmful Substance
Adjust the vibration on the handlebar Adjust the vibration on handlebar: If your head tube of the electric scooter is vibrating, use the supplied M5 hex wrench to tighten the two screws at the folding mechanism. Tyre valve extension Tyre valve extension: If your electric scooter front and rear tyres are deflated, use an extension tube for the tyre valves to inflate the tyres. -
Page 12: Declaration Of Conformity
Camarma de Esteruelas, 28816 Madrid Tel: 902 430 967 Fax: 91 8864285 NIF: B83254763 Manufacturing country: China Description: Roller-Pro Electric Bike Roller Pro® RP-HOPPER 4/6 complies with the following directives: EMC Standards: Directive 2014/30/UE EN55014-1: 2017 EN55014-2: 2015 EN6100-3-2: 2014...
Need help?
Do you have a question about the RP-HOPPER 6 and is the answer not in the manual?
Questions and answers