Error Messages; Messages During Operation - Denon Professional DN-300CR Quick Start Manual

Error Messages

If one of the following messages should appear, press the Stop button and then deal with the cause
of the error.
Message
Can't Rec
Disc Full
D-In Unlock
Program Empty
Program Full
Can't Edit
Can Not Decode

Messages During Operation

Message
No Disc
Blank Disc
Loading
Cause / Solution
Cannot record. Either erase the contents of the disc (for a CD-RW) or use a
different recordable disc.
Recording is not possible because there is no more recordable time or
recordable track on the disc.
No digital unit is connected to the Digital In jack (or the power of the
connected digital unit is turned off). Check the connection and power of your
digital unit.
This message will also appear if the sampling frequency of the Digital In is not
44.1 kHz.
Nothing has been programmed.
You have already programmed 99 songs.
The editing operation cannot be executed due to operational restrictions.
Failed to playback an MP3 file.
Cause
No disc is inserted.
An unrecorded disc is inserted.
An operation such as disc reading or writing is processing.
13